2020

Uhlig, B., Leiden, A., Sangwan, K. S., & Herrmann, C. (2020). Indo-German Center for Sustainable Manufacturing: A Collaboration Between Birla Institute of Technology and Science Pilani and Technische Universität Braunschweig. In K. S. Sangwan & C. Herrmann (Eds.), Enhancing Future Skills and Entrepreneurship (pp. 1–12). Springer International Publishing. https://doi.org/10.1007/978-3-030-44248-4_1
Sangwan, K. S., Choudhary, K., & Agarwal, S. (2020). Sustainability Assessment of Sanitary Ware Supply Chain Using Life Cycle Assessment Framework—A Case Study. In K. S. Sangwan & C. Herrmann (Eds.), Enhancing Future Skills and Entrepreneurship (pp. 167–179). Springer International Publishing. https://doi.org/10.1007/978-3-030-44248-4_17
Garg, G. K., Pawanr, S., & Sangwan, K. S. (2020). A Comparative Analysis of Surface Roughness Prediction Models Using Soft Computing Techniques. In K. S. Sangwan & C. Herrmann (Eds.), Enhancing Future Skills and Entrepreneurship (pp. 149–155). Springer International Publishing. https://doi.org/10.1007/978-3-030-44248-4_15
Sihag, N., & Sangwan, K. S. (2020). Development of an Electric-Load Intelligence System for Component Level Disaggregation to Improve Energy Efficiency of Machine Tools. In K. S. Sangwan & C. Herrmann (Eds.), Enhancing Future Skills and Entrepreneurship (pp. 117–129). Springer International Publishing. https://doi.org/10.1007/978-3-030-44248-4_12
Sangwa, N. R., & Sangwan, K. S. (2020). Continuous Kaizen Implementation to Improve Leanness: A Case Study of Indian Automotive Assembly Line. In K. S. Sangwan & C. Herrmann (Eds.), Enhancing Future Skills and Entrepreneurship (pp. 51–69). Springer International Publishing. https://doi.org/10.1007/978-3-030-44248-4_6
Bhamu, J., Bhadu, J., & Sangwan, K. S. (2020). Lean Manufacturing Implementation in Ceramic Industry: A Case Study. In K. S. Sangwan & C. Herrmann (Eds.), Enhancing Future Skills and Entrepreneurship (pp. 21–30). Springer International Publishing. https://doi.org/10.1007/978-3-030-44248-4_3
Rolinck, M., Gellrich, S., Herrmann, C., & Thiede, S. (2020). Data Analytics of Energy and Compressed Air Flows for Process and Quality Monitoring in Electro-Pneumatic Handling Systems. In K. S. Sangwan & C. Herrmann (Eds.), Enhancing Future Skills and Entrepreneurship (pp. 109–116). Springer International Publishing. https://doi.org/10.1007/978-3-030-44248-4_11
Juraschek, M., Büth, L., Thiede, S., & Herrmann, C. (2020). 3-CYCLE—A Modular Process Chain for Recycling of Plastic Waste with Filament-Based 3D Printing for Learning Factories. In K. S. Sangwan & C. Herrmann (Eds.), Enhancing Future Skills and Entrepreneurship (pp. 79–87). Springer International Publishing. https://doi.org/10.1007/978-3-030-44248-4_8
Büth, L., Juraschek, M., Thiede, S., & Herrmann, C. (2020). Choosing Products for Decentralized Manufacturing: Utilizing Recycled 3D Printing Filament in India and Germany. In K. S. Sangwan & C. Herrmann (Eds.), Enhancing Future Skills and Entrepreneurship (pp. 31–39). Springer International Publishing. https://doi.org/10.1007/978-3-030-44248-4_4
Herrmann, C., Büth, L., Juraschek, M., Abraham, T., & Schäfer, L. (2020). Application of biological transformation to foster positive urban production. Procedia CIRP, 90, 2–9. https://doi.org/10.1016/j.procir.2020.02.138
von Drachenfels, N., Cerdas, F., & Herrmann, C. (2020). Towards knowledge based LCE of battery technologies. Procedia CIRP, 90, 683–688. https://doi.org/10.1016/j.procir.2020.01.125
von Drachenfels, N., Cerdas, F., & Herrmann, C. (2020). Towards knowledge based LCE of battery technologies. Procedia CIRP, 90, 683–688. https://doi.org/10.1016/j.procir.2020.01.125
Büth, L., Juraschek, M., Cerdas, F., & Herrmann, C. (2020). Life cycle inventory modelling framework for symbiotic and distributed agricultural food production systems. Procedia CIRP, 90, 256–261. https://doi.org/10.1016/j.procir.2020.01.097
Blömeke, S., Rickert, J., Mennenga, M., Thiede, S., Spengler, T. S., & Herrmann, C. (2020). Recycling 4.0 – Mapping smart manufacturing solutions to remanufacturing and recycling operations. Procedia CIRP, 90, 600–605. https://doi.org/10.1016/j.procir.2020.02.045
Bhakar, V., Sangwan, K. S., & Digalwar, A. K. (2020). Readiness self-assessment of cement industry for sustainable manufacturing implementation: A case study of India. Procedia CIRP, 90, 449–454. https://doi.org/10.1016/j.procir.2020.02.042
Büth, L., Juraschek, M., Sangwan, K. S., Herrmann, C., & Thiede, S. (2020). Integrating virtual and physical production processes in learning factories. Procedia Manufacturing, 45, 121–127. https://doi.org/10.1016/j.promfg.2020.04.082
Czarski, M., Ng, Y. T., Vogt, M., Juraschek, M., Thiede, B., Tan, P. S., Thiede, S., & Herrmann, C. (2020). A Mixed Reality application for studying the improvement of HVAC systems in learning factories. Procedia Manufacturing, 45, 373–378. https://doi.org/10.1016/j.promfg.2020.04.039
Devika, Raj, P., Venugopal, A., Thiede, B., Herrmann, C., & Sangwan, K. S. (2020). Development of the Transversal Competencies in Learning Factories. Procedia Manufacturing, 45, 349–354. https://doi.org/10.1016/j.promfg.2020.04.031

2019

Choudhary, K., Sangwan, K. S., & Goyal, D. (2019). Environment and economic impacts assessment of PET waste recycling with conventional and renewable sources of energy. Procedia CIRP, 80, 422–427. https://doi.org/10.1016/j.procir.2019.01.096
Sihag, N., & Singh Sangwan, K. (2019). Development of a sustainability assessment index for machine tools. Procedia CIRP, 80, 156–161. https://doi.org/10.1016/j.procir.2019.01.018
Sangwan, K. S., & Sihag, N. (2019). Multi-objective optimization for energy efficient machining with high productivity and quality for a turning process. Procedia CIRP, 80, 67–72. https://doi.org/10.1016/j.procir.2019.01.022
Thomitzek, M., Cerdas, F., Thiede, S., & Herrmann, C. (2019). Cradle-to-Gate Analysis of the Embodied Energy in Lithium Ion Batteries. Procedia CIRP, 80, 304–309. https://doi.org/10.1016/j.procir.2019.01.099
Dér, A., Gabrisch, C., Kaluza, A., Cerdas, F., Thiede, S., & Herrmann, C. (2019). Integrating environmental impact targets in early phases of production planning for lightweight structures. Procedia CIRP, 80, 168–173. https://doi.org/10.1016/j.procir.2019.01.077
Madanchi, N., Thiede, S., Gutowski, T., & Herrmann, C. (2019). Modeling the impact of cutting fluid strategies on environmentally conscious machining systems. Procedia CIRP, 80, 150–155. https://doi.org/10.1016/j.procir.2019.01.068
Juraschek, M., Becker, M., Thiede, S., Kara, S., & Herrmann, C. (2019). Life Cycle Assessment for the comparison of urban and non-urban produced products. Procedia CIRP, 80, 405–410. https://doi.org/10.1016/j.procir.2019.01.017
Thomitzek, M., von Drachenfels, N., Cerdas, F., Herrmann, C., & Thiede, S. (2019). Simulation-based assessment of the energy demand in battery cell manufacturing. Procedia CIRP, 80, 126–131. https://doi.org/10.1016/j.procir.2019.01.097
Sihag, N., Leiden, A., Bhakar, V., Thiede, S., Sangwan, K. S., & Herrmann, C. (2019). The Influence of Manufacturing Plant Site Selection on Environmental Impact of Machining Processes. Procedia CIRP, 80, 186–191. https://doi.org/10.1016/j.procir.2019.01.023
Devika, & Singh, R. (2019). Influence of metacognitive awareness on engineering students’ performance: a study of listening skills. Procedia Manufacturing, 31, 136–141. https://doi.org/10.1016/j.promfg.2019.03.021
Singh, R., Devika, Herrmann, C., Thiede, S., & Sangwan, K. S. (2019). Research-based Learning for Skill Development of Engineering Graduates: An empirical study. Procedia Manufacturing, 31, 323–329. https://doi.org/10.1016/j.promfg.2019.03.051
Vogt, M., Uhlig, B., Sangwan, K. S., Herrmann, C., & Thiede, S. (2019). Implementation of a cyber-physical cooling storage station in a learning factory. Procedia Manufacturing, 31, 142–147. https://doi.org/10.1016/j.promfg.2019.03.022

2018

Leiden, A., Posselt, G., Bhakar, V., Singh, R., Sangwan, K. S., & Herrmann, C. (2018). Transferring experience labs for production engineering students to universities in newly industrialized countries. IOP Conference Series: Materials Science and Engineering, 297, 012053. https://doi.org/10.1088/1757-899X/297/1/012053
Sangwan, K. S., Herrmann, C., Soni, M. S., Jakhar, S., Posselt, G., Sihag, N., & Bhakar, V. (2018). Comparative Analysis for Solar Energy Based Learning Factory: Case Study for TU Braunschweig and BITS Pilani. Procedia CIRP, 69, 407–411. https://doi.org/10.1016/j.procir.2017.11.018

2017

Büth, L., Bhakar, V., Sihag, N., Posselt, G., Böhme, S., Sangwan, K. S., & Herrmann, C. (2017). Bridging the Qualification Gap between Academia and Industry in India. Procedia Manufacturing, 9, 275–282. https://doi.org/10.1016/j.promfg.2017.04.009
Juraschek, M., Cerdas, F., Posselt, G., & Herrmann, C. (2017). Experiencing Closed Loop Manufacturing in a Learning Environment. Procedia Manufacturing, 9, 57–64. https://doi.org/10.1016/j.promfg.2017.04.046

2016

Juraschek, M., Bhakar, V., Posselt, G., Kuluza, A., Böhme, S., Herrmann, C., & Sangwan, K. S. (2016). Recycling of plastic waste using fused deposition modeling as a production process. Indo German Conference on Sustainability 2016, Chennai.

2015

Bhakar, V., Sihag, N., Gieschen, R., Andrew, S., Herrmann, C., & Sangwan, K. S. (2015). Environmental Impact Analysis of a Water Supply System: Study of an Indian University Campus. Procedia CIRP, 29, 468–473. https://doi.org/10.1016/j.procir.2015.02.061

2014

2013

Bhakar, V. (2013). Environmental Life Cycle Assessment of Carpentry Training Processes. International Conference on Production and Industrial Engineering. https://doi.org/10.13140/2.1.4593.7441
Bhakar, V., Purwar, A., Nayak, A., Kumar, K., Singer, J., Egede, P., Herrmann, C., & Sangwan, K. S. (2013). Life Cycle Assessment of Lathe Processes for training application. International Conference on Management and Business Innovation, Jaipur.
Mittal, V. K., Egede, P., Herrmann, C., & Sangwan, K. S. (2013). Comparison of Drivers and Barriers to Green Manufacturing: A Case of India and Germany. Re-Engineering Manufacturing for Sustainability, 723–728.

2012

Mittal, V. K., Sangwan, K. S., Herrmann, C., Egede, P., & Wulbusch, C. (2012). Drivers and Barriers of Environmentally Conscious Manufacturing: A Comparative Study of Indian and German Organizations. In D. A. Dornfeld & B. S. Linke (Eds.), Leveraging Technology for a Sustainable World (pp. 97–102). Springer.

2011

Sangwan, K. S. (2011). Quantitative and Qualitative Benefits of Green Manufacturing: an Empirical Study of Indian Small and Medium Enterprises. In J. Hesselbach & C. Herrmann (Eds.), Glocalized Solutions for Sustainability in Manufacturing (pp. 371–376). Springer.
Mittal, V. K., & Sangwan, K. S. (2011). Development of an Interpretive Structural Model of Obstacles to Environmentally Conscious Technology adoption in Indian Industry. In J. Hesselbach & C. Herrmann (Eds.), Glocalized Solutions for Sustainability in Manufacturing (pp. 383–388). Springer.
Jindal, A., & Sangwan, K. S. (2011). Development of an Interpretive Structural Model of Barriers to Reverse Logistics Implementation in Indian Industry. In J. Hesselbach & C. Herrmann (Eds.), Glocalized Solutions for Sustainability in Manufacturing (pp. 448–453). Springer.
Herrmann, C., Sangwan, K. S., Mennenga, M., Halubek, P., & Egede, P. (2011). Assessment of Alternative Propulsion Systems for Vehicles. In J. Hesselbach & C. Herrmann (Eds.), Glocalized Solutions for Sustainability in Manufacturing (pp. 51–56). Springer.

2010

Halubek, P., Kassel, T., Kücükay, F., & Herrmann, C. (2010). Product quality and production costs in automotive industry – a simulation based evaluation of product- and quality strategies. 1st International Conference on Automotive Materials and Manufacturing, Pune, India.

2009

Herrmann, C., Thiede, S., Kuntzky, K., Böhme, S., Frauenhofer, M., & Gadhia, D. (2009). Indian Solar Thermal Technology: Potentials and Challenges. In M. S. Shunmugam & N. Ramesh Babu (Eds.), Sustainable product development and life cycle engineering: proceedings of the 7th Global Conference on Sustainable Manufacturing, December 2-4, 2009, Chennai, India. Indian Institute of Technology.